Computer Network Interview Questions
Job interviews are always stressful and they are tough enough to make fresher and even experienced one feel nervous and scary of the interview. Technical-interviews.com has been developed to help students and jobseekers to prepare for the tough job interview questions shot at them. Review the job interview questions and answers on networking basics, load runner, winrunner, .net, vb, java, oracle and many more common job interview questions online here. You have just made the first step to build the foundation for a successful interview by reviewing Technical-interviews.com.
Basic Networkin Questions - 1
What is source-route bridging algorithm ?
The source-route bridging (SRB) algorithm was developed by IBM and was proposed to the IEEE 802.5 committee as the means to bridge between all LANs. SRBs are so named because they assume that the complete source-to-destination route is placed in all inter-LAN frames sent by the source. SRBs store and forward the frames as indicated by the route appearing in the appropriate frame field. Assume that Host X wants to send a frame to Host Y. Initially, Host X does not know whether Host Y resides on the same LAN or a different LAN. To determine this, Host X sends out a test frame. If that frame returns to Host X without a positive indication that Host Y has seen it, Host X assumes that Host Y is on a remote segment. To determine the exact remote location of Host Y, Host X sends an explorer frame. Each bridge receiving the explorer frame copies the frame onto all outbound ports. Route information is added to the explorer frames as they travel through the internetwork. When Host X’s explorer frames reach Host Y, Host Y replies to each individually, using the accumulated route information. Upon receipt of all response frames, Host X chooses a path based on some predetermined criteria. Host X must select one of these two routes. The IEEE 802.5 specification does not mandate the criteria that Host X should use in choosing a route, but it does make several suggestions, including the following:
•First frame received
•Response with the minimum number of hops
•Response with the largest allowed frame size
•Various combinations of the preceding criteria
In most cases, the path contained in the first frame received is used.
Basic Networkin Questions - 2
What does the Mount protocol do ?
The Mount protocol returns a file handle and the name of the file system in which a requested file resides. The message is sent to the client from the server after reception of a client’s request.
What is anonymous FTP and why would you use it?
Anonymous FTP enables users to connect to a host without using a valid login and password. Usually, anonymous FTP uses a login called anonymous or guest, with the password usually requesting the user’s ID for tracking purposes only. Anonymous FTP is used to enable a large number of users to access files on the host without having to go to the trouble of setting up logins for them all. Anonymous FTP systems usually have strict controls over the areas an anonymous user can access.
Computer Network Interview Questions
Can you be able to identify between Straight- through and Cross- over cable wiring?
Straight-through is type of wiring that is one to to one connection Cross- over is type of wiring which those wires are got switchedWe use Straight-through cable when we connect between NIC Adapter and Hub. Using Cross-over cable when connect between two NIC Adapters or sometime between two hubs.
What is the significance of the IP address 255.255.255.255?
The limited broadcast address is utilized when an IP node must perform a one-to-everyone delivery on the local network but the network ID is unknown.
Computer Network Interview Questions 2
What is region?
When hierarchical routing is used, the routers are divided into what we will call regions, with each router knowing all the details about how to route packets to destinations within its own region, but knowing nothing about the internal structure of other regions.
What is traffic shaping?
One of the main causes of congestion is that traffic is often busy. If hosts could be made to transmit at a uniform rate, congestion would be less common. Another open loop method to help manage congestion is forcing the packet to be transmitted at a more predictable rate. This is called traffic shaping.
Computer Network Interview Questions 3
What is the range of addresses in the classes of internet addresses?
Class A 0.0.0.0 - 127.255.255.255
Class B 128.0.0.0 - 191.255.255.255
Class C 192.0.0.0 - 223.255.255.255
Class D 224.0.0.0 - 239.255.255.255
Class E 240.0.0.0 - 247.255.255.255
What is difference between ARP and RARP?
The address resolution protocol (ARP) is used to associate the 32 bit IP address with the 48 bit physical address, used by a host or a router to find the physical address of another host on its network by sending a ARP query packet that includes the IP address of the receiver. The reverse address resolution protocol (RARP) allows a host to discover its Internet address when it knows only its physical address.
